Back to Guitar Wrap
Sale!

Guitar Wrap – Guitar Skins

$4.00$46.00

Guitar Skins
Traditional Champagne Sparkle on Home-made Pick-Guard
Silver Pearl Black Onyx Guitar Wrap - Guitar Skins
Silver Pearl Black Onyx

Walopus Winning Drum Wrap Formula – Re-engineered and Optimized for Guitar Facing

Simple Peel-and-stick Installation. Apply to guitar’s body, headstock, pick-guard or control cover and trim the edges with a sharp knife.

The 3″ X 60″ Strips can be used for body sides or to make faux binding.

See full installation instructions on bottom of this page.

All prices in US$. Flat Rate Shipping to anywhere in the world. Up to three samples ship free.

Alien Omelette Guitar Wrap
Alien Omelette Guitar Wrap

To choose your designs; Peruse our drum wrap selection and state your design choice(s) in the comments box at checkout.

Clear selection
SKU: N/A Category:
Help us spread the word by sharing

Description

Gloriously Glossy and Luxuriously Lustrous Guitar Facing Material. Based on our popular drum wrap, but re-developed for use as a Guitar Wrap or Guitar Skin. Walopus Guitar Wrap – Guitar Skins have the same gleaming top finish as our Drum Wrap, but feature a re-engineered back layer with pressure sensitive adhesive.

 

Installation Instructions for Walopus Guitar Wrap – Guitar Skins

Before
Before
Strip the object and place on Guitar wrap
Strip the object and place on Guitar wrap
Trace outline with an extra inch or so
Trace outline with an extra inch or so
Cut
Cut
For set necks
For set necks
Trace for neck cut
Trace for neck cut
Test fit - Guitar Wrap - Guitar Skins
Test fit
Peel Backing about 1 inch
Peel Backing about 1 inch

 

Press in place and peel back more
Press in place and peel back more
keep going
keep going
Cut out cavities and object with a sharp knife
Cut out cavities and objects with a sharp knife
Re-install parts
Re-install parts
Trace around edge with sharp knife
Trace around edge with sharp knife

The following step is optional and only recommended for wraps marked with an asterisk (*) These wraps are slightly thicker (Tougher to cut) and benefit from sealing the edges. In this case we also painted a border around the wrap. (Not necessary). Any oil or solvent based paint, lacquer or enamel is suitable to seal with.

here we are using Rust-Enamel. Model Paint, Nail Polish, Poly-urethane, Tung-Oil, or any other solvent/oil based product is just as good. Sealing the edges is not necessary but the asterisk-marked skins will be more durable and long-lasting It also helps with aestetically blending the wrap with the body.

Tip: Sometimes sanding is the easiest way to get perfect edges on pickguards and covers when using the thicker wrap. (*)

Mask with electrical tape, paint, remove mask
Mask with electrical tape, paint, remove mask
Guitar Wrap - Guitar Skins
Finished

 

Additional information

Size

16" X 28", 12" X 12", 9" X 5", 3" X 60", Sample